Waste Plastic Cracking Machine in Cooling system

Environmental protective for the Waste Plastic Cracking Machine in Cooling System

Dispose waste gas, liquid, and residua in the process:

a. Waste gas: Transferred through two safety device: water seal &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.

b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless wa ste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)

c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the thick black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material).

Main components of the Waste Plastic Cracking Machine in Cooling System

a. Host horizontal rotary pyrolysis processor.

b. Feeding system

c. Pressure and temperature alarm system

d. Secondary catalytic tower

e. Automatic slag removal system

f. Central electronic control system

g. Tank cooling system

h. Gas heating system (exhaust gas treatment system)

i. Dust and dust removal system

Working process of the Waste Plastic Cracking Machine in Cooling System

1.Feeding requires 1-2 hours. Tires less than 1.4 meters can be directly fed into the tire. Large tires need to be cut and then fed; plastics are fed by automatic feeders or conveyor belts;

2. Heating takes about 6-8 hours. Normally, oil and gas will be produced when heated to 180 degrees. At 240-260 degrees, oil and gas will be produced in large quantities.

3. Cooling, oil and gas condenses into fuel oil through the cooling system;

4. During the pyrolysis and recovery of exhaust gas, in addition to oil and gas, some flammable but non-condensable gases will be generated. We call this [exhaust gas." This gas can be directly recovered for heating the pyrolysis reactor to save energy. fuel;

5. Carbon black and steel wire slagging, the end of the cracking process, oil and gas out of the reactor, the need to discharge the reactor inside the residual material, to carry out a new cracking process, these residues mainly include carbon black and steel wire used to make tire plastic.

Treatment of the raw material

↓

Hydraulic automatic feeding in

↓

Automatic slag-out ← pyrolyzer → desulphurization and deduster

↓ ↓

Air package draft fan

↓ ↓

1^st tube condenser first 2^nd purifier

↓ ↓

2^nd tube condenser second 2^nd purifier

↓ ↓

Cooling tower ← calandria condenser emission reach the standard

↓

Oil and gas separator product oil

↓

Water seal explosion-proof machine

Shangqiu Sihai Energy Technology Co., Ltd. after-sales service guarantee:

1. On the day of receipt of the prepayment of the equipment, technical personnel will be arranged to guide the foundation on the spot within one week.

2.Delivery is 15~20 days from the date of receipt of the advance payment, and technical personnel are sent to the site for free guidance, installation, commissioning and training on the same day or within three days of shipment to ensure that the machine can return after normal operation.

3. Lifetime warranty.

4. Different raw materials need the same machine, mainly because there are some differences in the cracking process. Our technicians will provide you with free operation training. You can also send raw material samples to our company to make free oil rate tests on your raw materials.

Contact us if you need more details on Scrap Plastic Extracting Oil. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Used Plastic Extracting Fuel、Plastic Extracting Fuel Oil. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Waste Plastic Pyrolysis Plant